Ram Clutches Street Hydraulic Kit 78136 – Hydraulic Release Bearing FORD Toploader 1 1/16-10

$167.00

Fits Ford Tremec Transmission HD RAM 78136

In stock (can be backordered)

SKU: HMS-78136

Description

FEATURES:

  • HD version features larger o-rings
  • .800″ total travel
  • 2.550″ face width
  • Stock retainer must be modified to 1.370″ diameter
  • Includes mounting hardware, bleeder kit

DESCRIPTION:

Reliable. When upgrading to handle more power people will replace their clutch and flywheel, but will often forget to upgrade their stock Hydraulic Throwout Bearing and this can cause serious problems with gear engagement. So upgrade to the new Ram Clutches Street Hydraulic Kit.

Adjustable. Ram Clutches Street Hydraulic Kit bearing is a floating design and installation is simple and quick.

Application. Ram Clutches hydraulic release bearings are designed for stock applications, kit car build ups, or circle track. The bearing is a floating design and installation is simple and quick. Optimal uses for this bearing are cars utilizing stock style clutches, or any project car in which fitting mechanical linkage is not possible. The bearing requires a minimum 3/4 inch bore master cylinder and a -3AN feed line to run from the master to the bearing. A remote bleeder kit is available to make bleeding simple from outside the bellhousing. All parts necessary for rebuild are available from Hanlon Motorsports.

Special Note – Requires trimming of the bearing collar OD to 1.370″ 

Ram Clutches Street Hydraulic bearings are not a direct replacement part and may not be suitable for every clutch, flywheel, and bellhousing combination. Measurement and positioning required to insure a proper fit. To determine if a Ram Clutch bearing will fit your application, please visit www.ramclutches.com.

Additional information

Weight 4 lbs
Dimensions 6 × 6 × 7 in
Manufacturer

RAM CLUTCHES